Introducing Bambu PLA Matte Desert Tan, a specialized filament designed specifically for high-speed printing applications. This unique variant stands out with its matte finish, adding a touch of classic elegance to your prints. Compared to regular PLA, Bambu PLA Matte achieves remarkable printing speeds of up to 250-300 mm/s, enabling swift and efficient production. By combining the benefits of PLA, such as easy printing, cost-effectiveness, and satisfactory strength, with the added advantage of a matte finish, Bambu PLA Matte offers a remarkable solution for a wide range of projects. Whether you're a hobbyist, an artist, or a professional, this filament enables you to bring your designs to life. Recommended Printing Settings Drying Settings before Printing 55 °C,8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 190 - 230 °C Bed Temperature (with PVP Glue) 35 - 45 °C Printing Speed < 300 mm/s With Bambu printers you can order refill filament. To get a spool for this filament you can either reuse your previous spool, print a new one or purchase a Bambu resuable spool. Instructions for Printed Spool When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x). Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll. Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece. Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock. Step 1. Make sure the spacing shim is installed inside the spool (under the triangle). Step 2. Tear apart and pull out the plastic strips.