In honor of EZ’s Brithday: Baby Surprise Jacket KAL

August 30, 2010| Lindy| 0 Comments | 4:51 pm

Categories:

Elizabeth Zimmerman’s 100th birthday was August 9. One of our expert knitters in the Nebraska Knit & Crochet Guild (NKCG) started a knit-a-long (KAL) of the “Baby Surprise Jacket” in honor of EZ’s birthday. I had never done this baby sweater pattern, so I joined in the KAL.

It turned into on of those obsession driven projects. You know the ones — where you become so intrigued by how the pattern is unfolding that you simply.cannot.put.it.down. Yup, your fingers just itch to knit and your brain refuses to think about anything else — especially mundane things like laundry, cooking and other housework. That’s what this little project became.

You see, the BSJ is knit entirely of garter stitch and involves a series of increases, decreases and center double decreases to make your knitting go at right angles. It is knit in a single piece — and the fascinating thing is that it turns into a sweater without the normal sweater type shaping that you usually do. As I knit this project, I kept marveling at the ingenuity of the designer — how in the heck had she figured this out? It’s a combination of understanding geometry and the shaping required for a baby sweater — and EZ was someone who took theoretical concepts like right angles and turned them into pragmatic knitted garments. Perhaps a few pictures will help.

When you finish knitting the pattern — you end up with an oddly shaped piece of garter stitch fabric that looks like this:

As you can see, I knit this with two different yarns to create stripes. Now, when you fold the edges together, this striped fabric turns into this:

A jacket. That’s the surprise — it actually turns into a little sweater jacket with nifty right angle striping on the front and horizontal striping on the back. And — there are only two seams to sew! Just two — the sleeves at the top. The button band is done as part of the bottom of the knitted piece, so you just add buttons and you are finished. (I’m still looking for buttons, so I don’t have a photo of the finished jacket.)

Now, the written pattern is somewhat confusing at first. There are several resources available to help sort out the sketchy instructions given in both the Knitter’s Almanac and Knitting Workshop. However, the biggest question I had was “if I knit this at a gauge of 6 stitches per inch, what size is my jacket?” EZ just tells you it will fit an infant if you knit at that gauge and if you knit it at a gauge of 5 stitches per inch, you will get a bigger jacket that will fit a larger child about 1 year old. This is this question that seems to cause knitters the most problems.

I knit this BSJ using Dale of Norway Baby Ull, which is a fingering weight wool yarn and my gauge was 6 spi. The jacket measures 15.25 inches across the chest, just at the point where the underarm is. Looking at a standard body measurements chart for baby sizes, This jacket is a 0-3 months size.

Now this sizing issue really bugged me — so I had to figure out the sizing for different gauges and correlate them to actual baby sizes. (Yes, I am a geek.) After studying the pattern, I discovered that the chest measurement is at the point in the pattern where you are knitting 90 stitches. (90 divided by 6 equals 15). So, using this point of reference, I have calculated roughly what the corresponding size will be if the BSJ is knitted at gauges of 5.5 spi, 5 spi, & 4.5 spi. I put this into a table to help others who might be bugged by this question:

Gauge	Chest Measurement	Size
6 spi	15-16 in.	0-3 mos
5.5 spi	16-17 in.	3-6 mos
5 spi	18 in.	12 mos.
4.5 spi	20 in	18 mos.

References:
Pattern: Ez’s instructions for the Baby Surprise Jacket can be found in Knitter’s Almanac or Knitting Workshop and/or it can be purchased from Schoolhouse Press.

Row Counter: A handy tool for keeping track while knitting the BSJ can be found here: http://www.box.net/shared/eugvsfb3lt

Video: There is a six-part video series on the BSJ, here is the link to the First Episode.

Ravelry Knitters — there is also a Rav Group for the BSJ.

1 thought on “In honor of EZ’s Brithday: Baby Surprise Jacket KAL”

Amanda says:

August 31, 2010 at 5:53 am

Wow. You’re done with yours. I’m still on Row 18. I’ll probably get to it this weekend when family is here. It’s a good chatty knitting project!

Comments are closed.

Cast On Methods: Cable Cast On and Backwards LoopCast On Methods: Cable Cast On and Backwards Loop

The Cable cast on is very similar to the knitted cast on. It starts the same way as the knitted cast on, where you make a slip knot and place it on your needle and then knit through the loop to form the next stitch. After this step, instead of knitting another stitch and putting it back on the right needle, you insert your needle between the two stitches to form the next loop and then place that back on the right hand needle. You continue making stitches by going between two stitches to make the loop.

Where I use the Cable cast on:

When I need a firm edge such as the border on a blanket
When I need to add stitches at the end of a row
Making a one -row buttonhole

Backwards Loop (e-Wrap) Cast On is a very basic cast on and is one of the cast ons often taught to beginning knitters. It starts with a short tail and a slip knot placed on a knitting needle. You then take the working yarn and wrap it over your thumb , insert the needle under the loop on the outside of your thumb and let it slide off your thumb onto the needle and tighten up the stitch.

Where to use the Backwards Loop Cast on:

This is an elastic cast on that can be used for most projects needing a stretchy edge (hats, gloves). You can also use it to add stitches in the middle of rows (i.e. the underarm of a top down sweater or at the base of the fingers of a glove.) You can also use it to add stitches at the end of a row. The loops between stitches can look sloppy so you need to pay attention to how you make your loops.

Here are links to YouTube videos for these two cast ons:

Knitting Help – Cable Cast On

Refined Cable Cast On

How to Knit: Backwards Loop Cast On

Technique Tutorial: Backwards Loop Cast On (shows how to cast on in middle of stitches)

How to Knit a Helpful Swatch – Part 3 Swatching in the RoundHow to Knit a Helpful Swatch – Part 3 Swatching in the Round

It took me a good bit of time to decide if I thought it was necessary to knit swatches in the round if I was knitting an item in the round rather than flat. The practice of knitting sweaters flat in pieces that are sewn together versus knitting sweaters in the round is, in itself, a whole topic with proponents for each practice. I may take this topic up at a later time, but for now I will focus on knitting a swatch in the round.

First, there are many knitters and designers who only use gauge swatches knit flat to determine their stitch gauge even if the pattern is knit in the round, and second, most patterns do not state how the gauge swatch was done. All you see in the pattern is the gauge statement.

Do you know if your gauge is the same if you knit in the round as when you knit flat? There’s a good chance that it’s not. As I’ve said before, gauge is a measure of how an individual knitter knits.

Think about how you knit when you knit in the round. One of the biggest differences is that you only knit on the right side of the fabric when you knit in the round. Using stockinette stitch as an example: When you knit flat, you knit one row (right side) and then turn your work and purl the next (wrong side). When you knit in the round, you join the stitches to make a circle and then knit every round.

Now, if you are one of the many knitters whose purls are looser than their knits, there is going to be a difference in tension between something you knit flat and something you knit in the round. Plus, you may modify your technique for knitting when knitting in round from when you knit flat. If you use straight needles when knitting flat, then switch to using circular needles or double point needles (dpns) to knit circular – your gauge may be significantly different. This is why I have come to the conclusion that it is good practice to swatch in the round when planning a project that will be knit in the round.

So how does one knit a swatch in the round? The first method is to cast on a enough stitches to give you a knitted tube that will be at least 4+ inches when laid flat. This could be the start of a sock or a hat. (Elizabeth Zimmerman said that “a hat makes a good swatch”.) Once you have a tube knitted of sufficient length for a good measurement, you treat this swatch the same way you would if your swatch that was knitted flat – i.e. measure, block, re-measure.

The second method goes by a couple of different names: “Speed Swatch” and “Circular Swatch with Floats” are two that I have found in my research. In this method, you use a circular needle and cast on the same number of stitches you would if you were knitting flat. But instead of knitting a row and then turning the swatch and knitting back to the end of the row, you slide your stitches to the needle on the opposite end and strand the working yarn loosely across the back and start knitting the next row. You keep repeating this process until you have a long enough swatch for good measurements. See pictures below:

Front of Swatch ITR — Knit with US 8 and Us 7 Needles

Once you have the swatch completed, you treat it the same way as any swatch – measure unblocked, block, re-measure. A note about measuring this swatch: Some sources suggest that it is easier to measure this swatch after cutting the loose strands so that the swatch will lay flat. Others simply say to measure the swatch by laying it as flat as you can. Logically, you are not going to want to cut the strands if you plan to reuse the yarn in the swatch. I’ve tried both ways and did not find a significant difference in measurements. Here are pictures of the swatch above after I blocked it and cut the floats to take the measurements:

So if you plan to knit a sweater in the round, please do your swatch in the round.

If you would like to see a video on this technique, here are three helpful ones:

Nancy Wynn, “How to do a Circular Gauge – Speed Method”: https://youtu.be/1W9XYgd3s7I

HowToCast: “How to Knit a Circular Gauge Swatch”: https://youtu.be/E1z2pbRmddY

11 Gauge Swatch Secrets PLUS How to Swatch in the Round | Off Our Needles S3E1: https://youtu.be/tv7uy0HetrI

10 in 201010 in 2010

I’ve signed on for a Ravelry group called “10 in 2010”. The idea is to identify 10 knitting projects you want to complete in 2010 and share your progress with the group. It’s a variation of a knit along.

So here is my “10 in 2010” project list:

Baby Romper & Cardigan(from Dale of Norway – Baby 203) in Baby Ull

EZ Green Sweater – because I want to learn to steek – yarn to be determined

Manly Aran Socks (from Knitting More Circles around Socks) in Knit Picks Stoll – merlot colorway

Finish Cable Rib Socks in Knit Picks Risata – baby doll colorway

Socks for me using Zueberball yarn – pattern to be determined

SFS Socks in Regia stretch – olive drab color

Teddy Bear (from Debbie Bliss Toy Knits) – using Peaches & Cream yarn

Socks using Brown Sheep Wildfoote yarn

Socks using Debbie Norville Serenity Yarn

Hat & matching scarf for me — yarn and pattern to be determined

This is an easy way to set some goals for knitting projects. If you are on Ravelry and are interested in joining, go to Groups and look for “10 in 2010”. Happy Knitting.