Mrs Peel - The Queen of Sin – by SPARX

As a young boy The Avengers were John Steed and Mrs Peel, not Iron Man, Thor etc . . . and I have clear recollection of the controversial Avengers episode 21 series4 on the BBC . . “A touch of Brimstone” with Emma as The Queen of Sin.
So to add to my Movie Favourite model collection my homage to Dame Diana Rigg in the role, I hope you enjoy. . . .

This Download is ONLY THE TV OUTFIT ALL PARTS ARE INCLUDED AS IN PICTURES TO CREATE A FULL MODEL AND BASE WITH ALTERNATIVE ARMS AND FOOTWARE.

All Print tested prior release. I will upload pics of completed painted model when I finish her . .

As previous an NSFW adult add-ons version is available to purchase separately.

https://cults3d.com/en/3d-model/naughties/mrs-peel-queen-of-sin-adult-add-ons-by-sparx

The Torso’s , Arms and Head parts are removable and interchangeable with magnets (see pics)
I have added some photo's of the finished Model so you can see the chain added . .

Based on Diana’s Measurements of 174cm Tall 33b–25–35

Model is 1/6th scale therefore 290mm Height flat footed. The Model therefore in heels with base = 320mm

Emma/Diana
1 upper torso corseted
4 Left Arm (plus arm pin)
1 two part left arm (see pics)
2 Right Arm
2 lower Trunk
2 Boots
2 Head and 1 Head pin
1 Base

18 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS

It is advised to assemble in groups of parts as per assembly instructions.
Hollow 2.40 Raft 101%
Lower Torso, Upper Torso, Heads, Boots

DO NOT Hollow
Arms

FDM
Arm, Heads, 80% fill 0.12 speed 40
Rest at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing.
Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining. . .
If using Head2 with long spikes in SLA. Ensure supports on spikes are smaller diameter than spikes . . e.g. use fine supports, medium on rest of head.